Column type aluminum alloy mast self-propelled high-altitude working platform climbing platform lifting table elevating platform
PRE-OPERATION PREPARATION
Wear safety helmet, labor protection shoes and safety belt correctly
PRE-OPERATION INSPECTION
Inspect whether surrounding working place allows the equipment to operate, and the ground is firm and level.
WORKPLACE INSPECTION
Walk-around inspection
Inspect whether the guardrail and mast have obvious cracking deformation
Inspect whether the mast is vertical after raising
Inspect function buttons on control panel are working or not
Inspect function buttons on control panel are working or not
Inspect limit switch is working or not
Product parameter
| AMWP1100 |
| Self-propelled Vertical Lift-Single Mast |
| Model |
AMWP6-1100 |
AMWP7.5-1100 |
| Max. Working Height |
8.00m |
9.50m |
| Max. Platform Height |
6.00m |
7.50m |
| Loading Capacity |
150kg |
125kg |
| Occupants |
1 |
1 |
| Overall Length |
1.40m |
1.40m |
| Overall Width |
0.76m |
0.76m |
| Overall Height |
1.99m |
1.99m |
| Platform Dimension |
0.66m×0.67m |
0.66m×0.67m |
| Wheel Base |
1.14m |
1.14m |
| Turning Radius |
0 |
0 |
| Travel Speed(Stowed) |
3.5km/h |
4km/h |
| Travel Speed(Raised) |
0.8km/h |
1.1km/h |
| Up/Down Speed |
48/40sec |
53/45sec |
| Gradeability |
25% |
25% |
| Drive Tyres |
Φ305×100mm |
Φ305×100mm |
| Drive Motors |
2×24VDC/0.5kW |
2×24VDC/0.5kW |
| Lifting Motor |
24VDC/1.3kW |
24VDC/1.3kW |
| Battery |
2×12V/100Ah |
2×12V/100Ah |
| Charger |
24V/15A |
24V/15A |
| Weight |
1120kg |
1190kg |
Applications
Aerial Work Platforms is widely used for the equipment installations and maintenance such as construction sites workshops, warehouse, granary, theatre or museum, bus/railway stations, hotels, airports, gas station and aerial pipeline. Non-trace universal polyurethane wheels used will be no damage to ground. DC Battery power make the low noise when using and convenient to moving and one person operation
Certificate
Test braking
Inspect lifting, driving and steering functions are normal
Inspect emergency lowering function and brake release function are normal
Inspect the pothole function and level sensor function are normal
EQUIPMENT OPERATION TRAINING
Turn on power and emergency stop button
Turn key switch to ground control
Turn up/down button to raise up or lower
Turn key switch to platform control
Enter into the platform
Fasten the safety buckle
Turn to the drive function
Hold function enable switch of joystick
Push joystick back and forth
To realize equipment forward, backward
Press Turtle button
To reduce drive speed,operation is safer
Hold joystick + left/right buttons
Realize equipment left and right turn
Switch to up/down mode
Hold function enable switch of joystick
Push joystick back and forth
To raise up or lower
After the equipment is raised, it can drive at height
FEATURES
Battery power
Suitable for workshop, warehouse, hotel and other indoor places
It is compact to pass easily
Pothole plate opens after the the equipment is raised up
To ensure the stability and safety of the platform when driving at height and tires drop into pothole
When machine tilts over two degrees, only lowering is allowed
When the equipment lowers to two meters, it will stop automatically
Turn off power,turn key switch to ground control
press down arrow+ turn on power
Brake release is finished when hearing "di"sound
When batteries are out of power, the brake can be released manually and allow pushing it to the charging place manually
When there is emergency, pull out the emergency lower button and the equipment will slowly lower
In case of emergency, press the emergency stop button, the equipment can stop working
Once the tubing breaks, blood proof valve can prevent mast from drop
If equipment is breakdown,there will be a fault code to help worker to repair quickly
The equipment is equipped with beacon, horns and buzzers
Remind unauthorized personnel that the equipment is working
Standard forklift pocket to load conveniently and safely
To protect charger when voltage is not stable
COMPLIANT WITH CE AND ANSI
EQUIPMENT INSPECTION
Product line
1.Proportional controls
2.Automatic pothole protection
3.Drivable at full height
4.Non-marking tyre
5.Automatic brake system
6.Emergency lowering system
7.Emergency stop button
8.Cylinder holding valve
9.Onboard diagnostic system
We are a manufacturer specializing in the production of handling equipment. We firmly follow the trend of international modern industrial and logistics equipment in the direction of convenience, intelligence, energy saving and environmental protection,and is determined to become a high-tech enterprise in logistics handling, and strive to become a leader in logistics solutions.
We have internal combustion counterbalanced forklifts, battery counterbalanced forklifts, electric logistics handling equipment container cranes, electric hoists,self-propelled high-altitude working platform,etc., and forklift can be equipped with accessories with different functions to meet the needs of customers in different places and environments,Our factory has advanced parts processing center, robot welding equipment, parts self-propelled hoist conveying line, painting line, assembly line whole machine performance testing line, forklift parts test bench and ERP management system. Our products are widely concerned and favored by domestic and foreign customers for their beautiful appearance, high-quality and comprehensive services, safe, reliable and cost-effective, and have been successfully exported to more than 100 countries and regions around the world.
Being open, vibrant, confident and courageous,, we are always warmly welcome friends from all over the world to joint efforts for a brightful future.
FAQ
Q: What is your delivery time?
A: The delivery time is around 30 working days. In peak season, the production time would take longer.
Q: What is the payment term?
A: Normally we accept, TT, LC at sight.
Q: What color can I choose?
A: There are Yellow, Red, Blue, Black, White, Orange, and Green to choose. We can customize the color according to your color number.
Q: Can I see the production progress after order?
A: Yes, during production, we can have video call and we could take photos/videos for your reference.
Q:What certification do you have?
A:Our company has passed ISO 9001:2008 and all of the product have CE certification.
Q: What kind of service can I get from you if I buy? How can I get parts?
A: We have 1 year warranty for each machine.Within 1 year warranty, if any parts failure caused by quality issues, the new parts would be sent to you free of charge within 7 working days. We have professional after sales department to support for you at any time.
Q:How can I get the best price?
A:Price is the most concerning problem of every customer,if you want to know the price.We need to know your detailed requirements.
Audited Supplier 
){kind=link}
){kind=link}