| After-sales Service: | 1 Year or 1000 Working Hours |
|---|---|
| Warranty: | 1 Year or 1000 Working Hours |
| Cab Location: | Not Adjustable |
| Type: | Diesel Forklift |
| Power: | Diesel Engine |
| Load Capacity: | 18T - 42T |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Engine:
Cummins and Weichai turbocharged diesel engines are used, which have strong power, energy saving and environmental protection, and meet the requirements of efficient operation.
Gearbox:
1. Adopt three-tooth power hydraulic transmission, combined working conditions with large traction, double variable system is more reliable.
2. Adopt twin-turbine torque converter, stepless transmission, single lever control transmission system, easy to operate.
Drive axle:
1. The front axle adopts heavy forklift drive axle, axle housing, wheel hub, bearing increase size, spiral bevel gear and wheel edge planetary wheel deceleration and torsion, steel axle housing support, large load capacity, long service life.
2. The rear axle adopts the transverse hydraulic cylinder steering mechanism, the steering axle is compact, and the transmission Angle can reach 70.5°, which is conducive to reducing the steering resistance, reducing tire wear, and improving the ride comfort during driving.
Hydraulic system:
1. Full hydraulic load sensing steering system, small turning radius of rear steering bridge, light and flexible steering.
2. The use of dual pump combined working hydraulic system, greatly reduce fuel consumption, energy consumption.
3. The hydraulic system is equipped with oil radiator and back pressure protection device to ensure the heat balance of the whole machine.
Frame, door frame:
1. The use of long wheelbase, box-shaped double beam frame can provide good rigidity and strength to ensure the high reliability of the forklift chassis.
2. The door frame is lowered by speed limiting valve and pressure selection valve to reduce the impact of hydraulic system, and the door frame can be lowered to the ground from the height when the engine is turned off.
3. The internal and external door frame adopts roller coordination and pulley labor-saving structure, which has long service life and high reliability.
Shelves:
1. Hydraulic distance fork, easy adjustment.
2 Cathcart high strength fork, higher strength, more wear-resistant, can double the life.
Tires:
The use of block-deepened heavy forklift tire, the rear steering axle can swing around the center, with good traction performance and passing performance.
Luxury cab:
1. Adjustable steering machine, airline seat, more comfortable sitting; Air handle pilot control, light and flexible operation, more comfortable sitting.
2. Luxury wide vision cab, with skylight, low noise, good sealing, easy to observe around the driver.
3. The use of domestic high-quality electrical components, maintenance-free battery, wire using flame retardant materials, reliable and durable work.
| Model | FD420 | ||
| Features | Rated Load | Kg | 42000 |
| Load Center | mm | 1250 | |
| Wheelbase | mm | 5500 | |
| Weight | Weight | kg | 53000 |
| Chassis | Tire Specs:Front | 18.00-25 | |
| Tire Specs:Rear | 16.00-25 | ||
| Tires Qty,front/rear(X-dreve wheels) | 4/2 | ||
| Wheel tread:Front | mm | 2480 | |
| Wheel tread:Rear | mm | 2880 | |
| Dimensions | Mast/carriage tilt angle(front/rear) | Degree(°) | 6/12 |
| Mast height(fork lowering) | mm | 5040 | |
| Mast lifting height | mm | 4000 | |
| Max.height | mm | 7040 | |
| height to head guard(height to cab) | mm | 3890 | |
| Overall height(with forks) | mm | 10770 | |
| Fork front verticaal sueface to the rear end of the vehicle | mm | 8170 | |
| Overall width | mm | 3600 | |
| Fork dimension | mm | 2600*320*130 | |
| Fork carriage width | mm | 3160 | |
| Mast min ground(with load) | mm | 350 | |
| Wheelbase center min ground(with load) | mm | 480 | |
| Min.turning Radius | mm | 7730 | |
| Travel speed(with load/without load) | km/h | 22/26 | |
| Performance | Max.lifting speed(with load/without load) | mm/s | 220/260 |
| tractionn | KN | 240 | |
| gradeability(with load/without load) | % | 20/20 | |
| Engine | Engine brand/model | Weichai/Cummins | |
| Cylinder No | 6 | ||
| Others | Transmission gears(Front/rear) | 4/4 |
We are a manufacturer specializing in the production of handling equipment. We firmly follow the trend of international modern industrial and logistics equipment in the direction of convenience, intelligence, energy saving and environmental protection,and is determined to become a high-tech enterprise in logistics handling, and strive to become a leader in logistics solutions.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}